CCP Blow-Dry & Thermal Styling 2 — Questions and Answers
Question 1: Which section size is recommended when using a round brush for maximum volume at the root?
- Sections equal to the diameter of the brush (Correct answer)
- Sections twice the diameter of the brush
- Sections half the diameter of the brush
- Section size does not affect volume
Correct answer: Sections equal to the diameter of the brush
Using sections equal to the brush diameter ensures maximum tension and lift at the root for optimal volume.
Question 2: What is the primary purpose of using a concentrator nozzle attachment on a blow-dryer?
- To diffuse airflow for curly hair
- To direct airflow precisely onto a section (Correct answer)
- To reduce heat output
- To increase overall air volume
Correct answer: To direct airflow precisely onto a section
A concentrator nozzle focuses the airflow into a narrow stream, allowing precise directional styling on specific sections.
Question 3: When blow-drying fine hair, which technique best prevents breakage?
- Using maximum heat on wet hair immediately
- Keeping the dryer moving and using low-to-medium heat (Correct answer)
- Holding the dryer in one spot until dry
- Always blow-drying against the cuticle
Correct answer: Keeping the dryer moving and using low-to-medium heat
Keeping the dryer moving and using moderate heat prevents heat concentration that could damage fragile fine hair.
Question 4: A client wants a sleek, straight blowout. Which brush type is MOST appropriate?
- Round boar-bristle brush
- Vent brush
- Paddle brush (Correct answer)
- Teasing brush
Correct answer: Paddle brush
A paddle brush's wide, flat surface smooths large sections efficiently, making it ideal for sleek, straight blowouts.
Question 5: What does 'stretching' the hair mean in the context of blow-dry styling?
- Physically pulling hair to cause elongation
- Using tension and heat to lengthen the curl pattern (Correct answer)
- Adding extensions during blowout
- Over-drying hair to remove moisture
Correct answer: Using tension and heat to lengthen the curl pattern
Stretching uses blow-dry tension and heat to temporarily elongate the natural curl or wave pattern for a smoother result.
Question 6: Which blow-dry technique is BEST for adding curl definition to naturally wavy hair without a diffuser?
- Scrunch drying with low heat (Correct answer)
- Rough drying with high heat
- Blow-drying straight then curling
- Pin-curl set before drying
Correct answer: Scrunch drying with low heat
Scrunching the hair upward while drying on low heat encourages the natural wave pattern and adds definition without disrupting curl formation.
Question 7: What is the recommended distance to hold a blow-dryer from the scalp to avoid burns?
- 1/2 inch
- 1 inch
- 3–6 inches (Correct answer)
- 10–12 inches
Correct answer: 3–6 inches
Holding the dryer 3–6 inches from the scalp distributes heat safely without risking burns to the client or stylist.
CCP Blow-Dry & Thermal Styling 2
Which section size is recommended when using a round brush for maximum volume at the root?