Practice Test Geeks(CCO) Certified Crematory Operator Practice Test
← All CCO Flashcard Decks

CCO Facility Management & Safety Protocols Flashcards

6 cards from real CCO practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 CCO Facility Management & Safety Protocols flashcards as text

  1. Under OSHA's Bloodborne Pathogens Standard, employers must offer the hepatitis B vaccine to at-risk employees:

    Answer: At no cost to the employee, within 10 working days of initial assignment

    OSHA requires employers to offer hepatitis B vaccination at no cost to employees with occupational exposure within 10 working days of initial assignment.

  2. What is the correct first aid response if a crematory worker is splashed with bodily fluids on the face?

    Answer: Immediately flush the affected area with water for 15 minutes and report the exposure incident

    Immediate flushing with water for at least 15 minutes is the required first aid response to bloodborne pathogen exposure, followed by reporting and medical evaluation.

  3. Which of the following is an example of an engineering control used to reduce bloodborne pathogen exposure at a crematory?

    Answer: Using a mechanical lift system to transfer remains without direct manual handling

    Mechanical lift systems reduce physical contact with remains and represent an engineering control that eliminates or minimizes the exposure hazard at the source.

  4. What document must a crematory complete and submit to OSHA if an employee suffers a work-related injury that results in days away from work?

    Answer: Both OSHA Form 300 and Form 301

    Both Form 300 (the injury log) and Form 301 (the incident report form) must be completed for recordable work-related injuries, with Form 300A posted annually.

  5. What is the minimum temperature a crematory's utility sink hot water must reach to effectively reduce microbial contamination during handwashing?

    Answer: 100°F (38°C)

    Handwashing water should be at least 100°F (38°C) to be effective, though proper soap and friction technique are more important than water temperature alone.

  6. What is the purpose of the OSHA Form 300A (Summary of Work-Related Injuries and Illnesses)?

    Answer: It is posted in the workplace each year from February 1 to April 30 to inform employees of injury statistics

    OSHA Form 300A summarizes the prior year's injury and illness data and must be posted in a visible workplace location from February 1 through April 30 each year.