Practice Test Geeks(CCI) Certified Construction Inspector Practice Test
← All CCI Flashcard Decks

Safety Regulations & Compliance Flashcards

7 cards from real CCI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety Regulations & Compliance flashcards as text

  1. Under OSHA 29 CFR 1926.502, what is the maximum free-fall distance allowed when using a personal fall arrest system?

    Answer: 6 feet

    OSHA 29 CFR 1926.502 limits free-fall distance to 6 feet when using a personal fall arrest system.

  2. Which OSHA standard governs excavation and trenching safety on construction sites?

    Answer: 29 CFR 1926.650–652

    Subpart P (29 CFR 1926.650–652) covers excavations, including trenching and shoring requirements.

  3. A trench 6 feet deep in Type C soil must be sloped at a maximum angle of:

    Answer: 1½H:1V

    Type C soil, the least stable classification, requires a slope of 1½H:1V (34 degrees from horizontal).

  4. According to OSHA, which party is responsible for conducting a competent person inspection of an excavation?

    Answer: A designated competent person

    OSHA 1926.651 requires a competent person to inspect excavations daily and after rain events.

  5. Under OSHA 1926.100, hard hats on construction sites must meet the requirements of which standard?

    Answer: ANSI Z89.1

    OSHA 1926.100 requires head protection to meet ANSI Z89.1 performance standards.

  6. What minimum distance must a crane's boom or load maintain from an energized power line rated at 50 kV or less?

    Answer: 10 feet

    OSHA 1926.1408 requires a minimum 10-foot clearance from energized lines up to 50 kV.

  7. The OSHA Hazard Communication Standard (HazCom) requires Safety Data Sheets to contain how many sections?

    Answer: 16

    The GHS-aligned HazCom standard (29 CFR 1910.1200) requires SDS documents to have exactly 16 standardized sections.