CCC Parts Procurement & Vehicle Restoration Flashcards
6 cards from real CCC practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 CCC Parts Procurement & Vehicle Restoration flashcards as text
What does 'corrosion protection' applied during collision repair primarily prevent?
Answer: Rust formation on bare metal exposed by cutting, welding, or panel replacement
Corrosion protection products seal bare metal surfaces created during repair to prevent oxidation and maintain the vehicle's structural integrity over time.
Which type of sealer is typically applied to pinch welds and seams during a collision repair to restore factory corrosion protection?
Answer: Seam sealer
Seam sealer is applied to joints and overlapping metal edges to prevent moisture intrusion and replicate the factory-applied sealing found on new vehicles.
What is the purpose of a 'weld-through primer' in collision repair?
Answer: To protect bare metal flanges from corrosion at weld joints before panels are welded together
Weld-through primer is applied to metal mating surfaces prior to welding so the heat-affected zone retains corrosion protection that the weld would otherwise burn away.
During vehicle restoration, what is the purpose of a 'media blast' or 'soda blast' process?
Answer: To remove old paint, rust, and coatings from the vehicle's surface without damaging the underlying metal
Media blasting propels abrasive or non-abrasive particles at the surface to strip coatings and corrosion uniformly while preserving the base metal.
What does 'panel alignment' refer to in the context of collision restoration?
Answer: Adjusting gaps and flushness between body panels so they match factory specifications
Panel alignment ensures that doors, hoods, fenders, and trunk lids are positioned with even gaps and flush surfaces as specified by the manufacturer's body gap tolerances.
What is 'color sanding' used for in a vehicle restoration or collision refinish?
Answer: Leveling the cured clearcoat to remove texture imperfections before polishing to a high gloss
Color sanding uses fine-grit wet sandpaper to flatten orange peel, dust nibs, and runs in the clearcoat, followed by machine polishing to restore gloss.