Practice Test GeeksCCA - Citrix Certified Associate Practice Test
← All CCA Flashcard Decks

Network Configuration Flashcards

7 cards from real CCA practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Network Configuration flashcards as text

  1. On a Citrix ADC, which IP address is used for management access to the appliance itself?

    Answer: NSIP

    The NetScaler IP (NSIP) is the management address of the appliance.

  2. Which Citrix ADC IP address is used as the source address when the appliance communicates with back-end servers?

    Answer: SNIP

    The Subnet IP (SNIP) is used for communication with back-end servers.

  3. Users connect from the internet to a Citrix Gateway virtual server. What type of address is the virtual server bound to?

    Answer: VIP

    Client-facing virtual servers listen on a Virtual IP (VIP).

  4. What is the purpose of the internal beacon configured in StoreFront?

    Answer: Lets Citrix Workspace app detect whether it is on the internal network

    If the internal beacon is reachable, Workspace app connects directly instead of through Gateway.

  5. Which statement about external beacons in StoreFront is correct?

    Answer: They confirm internet connectivity and should be resolvable from outside the network

    External beacons verify that the device has internet access, so they must be reachable externally.

  6. Which port does Citrix Gateway typically use to proxy HDX traffic from external clients?

    Answer: TCP 443

    Gateway wraps ICA in SSL/TLS over port 443, so only HTTPS needs to be open externally.

  7. To allow EDT through Citrix Gateway for external users, what must be enabled on the Gateway virtual server?

    Answer: DTLS

    DTLS secures UDP-based EDT traffic through Gateway and must be enabled on the vServer.