CBT - Certified Broadcast Technologist RF and Antenna Systems Questions and Answers

Question 1

A broadcast station is experiencing periodic signal fade and unexpected long-distance reception of its VHF signal, particularly on hot, calm days. This phenomenon is most likely caused by which of the following?

Accepted Answer

Tropospheric ducting

Answer

Tropospheric ducting occurs when a temperature inversion creates a 'duct' in the troposphere that can trap VHF and UHF signals, allowing them to travel much farther than the normal line-of-sight. This condition is often associated with stable, high-pressure weather systems, such as hot, calm days, and can cause interference from distant stations or unusual long-range reception.

Question 2

What is the primary function of a radome on a broadcast antenna?

Accepted Answer

To protect the antenna from environmental elements

Answer

A radome is a structural, weatherproof enclosure that protects an antenna from environmental elements like ice, rain, wind, and debris. It is constructed from material that is transparent to radio waves, minimizing signal attenuation while safeguarding the physical integrity and performance of the antenna.

Question 3

An impedance mismatch between a transmitter's 50-ohm output and an antenna system results in a high Voltage Standing Wave Ratio (VSWR). Which of the following is a direct consequence of this condition?

Accepted Answer

A portion of the RF power is reflected back to the transmitter

Answer

A high VSWR is an indicator of an impedance mismatch, which causes a portion of the forward power traveling to the antenna to be reflected back down the transmission line toward the transmitter. This reflected power can potentially damage the transmitter, reduce the overall efficiency of the system, and lead to signal degradation.

Question 4

A broadcast engineer is selecting an antenna for a new FM station. The antenna specification sheet lists its gain as 5 dBd. What is the equivalent gain expressed in dBi?

Accepted Answer

7.15 dBi

Answer

The gain of an antenna can be expressed relative to a theoretical isotropic radiator (dBi) or a half-wave dipole antenna (dBd). A standard dipole antenna has a gain of 2.15 dBi. To convert from dBd to dBi, you add 2.15 dB. Therefore, 5 dBd + 2.15 dB = 7.15 dBi.

Question 5

For maximum signal transfer between a transmitting antenna and a receiving antenna in a line-of-sight system, which property of the antennas must be aligned?

Accepted Answer

Polarization

Answer

Polarization refers to the orientation of the electric field of the radio wave. For optimal signal reception and maximum power transfer, the transmitting and receiving antennas must have the same polarization (e.g., both vertical or both horizontal). A mismatch in polarization can cause significant signal loss.

(CBT) Certified Broadcast Technologist Practice Test

(CBT) Certified Broadcast Technologist Practice Test

CBT - Certified Broadcast Technologist RF and Antenna Systems Questions and Answers