CBSPD Point-of-Use Treatment and Transportation of Surgical Instruments 3

Question 1

What does 'loaner instrument' or 'vendor tray' management require before use in surgery?

Accepted Answer

Loaner instruments must be inspected, decontaminated, and sterilized by the facility SPD before use regardless of vendor claims

Answer

AORN and AAMI standards require that all loaner instruments be inspected and processed by the facility's SPD regardless of the vendor's claims about their condition.

Question 2

What is the recommended advance notice facilities should require from vendors for loaner instrument delivery?

Accepted Answer

At least 24 hours before the scheduled procedure to allow adequate processing time

Answer

Professional guidelines recommend loaner instruments arrive at least 24 hours before the procedure to allow thorough inspection, decontamination, and sterilization.

Question 3

Which action should be taken if soiled instruments arrive in SPD without proper biohazard labeling?

Accepted Answer

Refuse acceptance until proper labeling is applied, and report the violation per facility policy

Answer

Proper biohazard labeling is an OSHA requirement; accepting unlabeled containers without addressing the violation could put staff at risk and represents a compliance failure.

Question 4

When transporting instruments between facilities (e.g., off-site SPD services), which regulation primarily governs the transport of biohazardous materials?

Accepted Answer

DOT (Department of Transportation) regulations for biohazardous/infectious substance transport

Answer

The DOT regulates the packaging, labeling, and transport of biohazardous materials (Category B infectious substances) on public roads and via other transportation modes.

Question 5

What is the purpose of an instrument tracking system in sterile processing?

Accepted Answer

To link sterilization records to specific patient cases for traceability and recall capability

Answer

Instrument tracking systems provide patient-level traceability by linking each processed tray to a specific sterilization load, cycle, and patient, enabling targeted recalls if a processing failure occurs.

CBSPD - Certification Board for Sterile Processing and Distribution Practice Test

CBSPD - Certification Board for Sterile Processing and Distribution Practice Test

CBSPD Point-of-Use Treatment and Transportation of Surgical Instruments 3