CBET - Certified Biomedical Equipment Technician Medical Gas Systems Questions and Answers

Question 1

Which safety system is specifically designed to prevent the accidental connection of the wrong gas-specific flowmeter or hose to a medical gas wall outlet?

Accepted Answer

Diameter Index Safety System (DISS)

Answer

The Diameter Index Safety System (DISS) uses non-interchangeable, gas-specific threaded connections on wall outlets and equipment to prevent misconnections. Each gas service has a unique set of diameters on the connector body and nipple, making it physically impossible to connect equipment for one gas to the outlet of another. PISS is used for small gas cylinders, not wall outlets.

Question 2

A hospital's master alarm panel activates, indicating 'Reserve In Use' for the main oxygen supply. What does this specific alarm signify?

Accepted Answer

The system has automatically switched from the primary oxygen source to the secondary (backup) source.

Answer

A 'Reserve In Use' alarm on a master alarm panel indicates that the primary gas supply (e.g., the main bank of cylinders or liquid tank) is depleted, and the manifold has automatically switched over to the secondary or reserve supply to ensure an uninterrupted flow of gas. This alerts staff that the primary supply needs to be replenished soon.

Question 3

In a medical gas pipeline system, what is the primary function of a zone valve box?

Accepted Answer

To isolate the gas supply to a specific area or floor for maintenance or in an emergency.

Answer

Zone valve boxes contain shut-off valves that control the flow of medical gases to a specific, defined area (a 'zone') of the hospital, such as an operating room suite or a patient wing. Their main purpose is to allow staff to quickly shut down the gas supply to that zone in an emergency (like a fire) or to allow for maintenance without disrupting the gas supply to the entire facility.

Question 4

According to NFPA 99, what is the standard nominal operating pressure range that should be maintained at the station outlets for most medical gas systems, such as oxygen and medical air?

Accepted Answer

50-55 psig

Answer

NFPA 99 specifies that medical gas piping systems (except for nitrogen and instrument air, which may be higher) must be capable of maintaining a pressure of 50-55 psig (pounds per square inch gauge) at the station outlets. This standard pressure is required for the proper operation of most medical equipment, such as ventilators and anesthesia machines.

Question 5

A biomedical technician is reviewing the design for a new medical gas source equipment room. Which component is responsible for ensuring an uninterrupted supply of gas by automatically switching from the depleted 'in-use' cylinder bank to the 'reserve' bank?

Accepted Answer

The automatic changeover manifold

Answer

The automatic changeover manifold is the critical device at the gas source that monitors the pressure of the primary cylinder bank. When the pressure drops to a preset level, it automatically switches the gas flow to draw from the reserve bank, ensuring a continuous supply to the hospital and triggering a 'reserve in use' alarm.

CBET - Certified Biomedical Equipment Technician Practice Test

CBET - Certified Biomedical Equipment Technician Practice Test

CBET - Certified Biomedical Equipment Technician Medical Gas Systems Questions and Answers