CBCP Blueprint Reading & Technical Drawings 5

Question 1

Record (as-built) drawings are prepared to show:

Accepted Answer

Actual installed conditions after construction

Answer

Record drawings document field changes and installed locations for owner O&M use.

Question 2

During design review, a commissioning authority compares equipment schedules against the Basis of Design primarily to verify:

Accepted Answer

Capacities and features meet the OPR and BoD

Answer

Design review confirms the documents support the owner's requirements before construction.

Question 3

Why does a commissioning reviewer check that drawings show service clearances and access doors?

Accepted Answer

To ensure equipment can be tested, maintained and balanced

Answer

Adequate access is needed for functional testing, TAB and long-term maintenance.

Question 4

BIM clash detection is mainly used to:

Accepted Answer

Find spatial conflicts between systems before installation

Answer

Clash detection identifies interferences such as ducts hitting beams so they are resolved before construction.

Question 5

Which view shows a vertical face of a building without cutting through it?

Accepted Answer

Elevation

Answer

Elevations show exterior or interior faces; sections cut through to reveal internal construction.

CBCP - Certified Building Commissioning Professional Practice Test