Practice Test Geeks(CAT) Certified Alarm Technician Level I Practice Test
← All CAT Flashcard Decks

Blueprint Reading & Interpretation Flashcards

7 cards from real CAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Blueprint Reading & Interpretation flashcards as text

  1. A blueprint legend shows a half-filled circle symbol. According to NFPA 72 conventions, this typically represents a:

    Answer: Combination smoke/heat detector

    A half-filled circle is commonly used to denote a combination smoke and heat detector on NFPA 72 compliant fire alarm drawings.

  2. What is the purpose of a 'detail' drawing referenced on a fire alarm plan?

    Answer: To provide enlarged views of complex or critical installation areas

    Detail drawings zoom in on specific areas to clarify complex installations that cannot be clearly shown at the standard plan scale.

  3. On a fire alarm blueprint, a solid triangle symbol pointing upward most commonly represents:

    Answer: A manual pull station

    A solid triangle or arrow-shaped symbol pointing upward is the NFPA 72 standard symbol for a manual pull station.

  4. Which document in a set of construction drawings would specify the wire type and insulation rating for fire alarm circuits?

    Answer: Electrical specifications (Division 28)

    Fire alarm wiring specifications, including conductor type and insulation rating, are found in Division 28 (Electronic Safety and Security) of the project specifications.

  5. A fire alarm drawing note states 'VFY W/AHJ'. What does this instruction require the technician to do?

    Answer: Verify the requirement with the Authority Having Jurisdiction

    AHJ stands for Authority Having Jurisdiction; this note instructs the installer to confirm the requirement with that governing body before proceeding.

  6. On a fire alarm site plan, what is the PRIMARY purpose of showing the property boundary and building footprint together?

    Answer: To determine setback distances and locate outdoor notification appliances or control panel exits

    Combining the property boundary and footprint helps installers locate outdoor devices and building entry/exit points relative to code-required setbacks.

  7. Which view would BEST show the mounting height of a horn/strobe on an exterior wall?

    Answer: Exterior elevation drawing

    An exterior elevation drawing shows the wall face with height dimensions, making it ideal for verifying device mounting heights on exterior surfaces.