Practice Test GeeksCAT - Certified Aerospace Technician Practice Test
← All CAT Flashcard Decks

Aviation Safety and Regulations Flashcards

6 cards from real CAT practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 Aviation Safety and Regulations flashcards as text

  1. What does the acronym FOD stand for in aerospace safety?

    Answer: Foreign Object Debris/Damage

    FOD (Foreign Object Debris/Damage) refers to any object or material that could damage aircraft or injure personnel, making FOD prevention a critical safety practice.

  2. Which regulation governs the maintenance record-keeping requirements for U.S.-registered aircraft?

    Answer: 14 CFR Part 43

    14 CFR Part 43 establishes the requirements for maintenance, preventive maintenance, rebuilding, and alteration, including maintenance record-keeping obligations.

  3. What is the primary purpose of a Safety Management System (SMS) in aerospace organizations?

    Answer: To proactively identify and mitigate safety risks before accidents occur

    An SMS provides a systematic, proactive framework for managing safety risks by identifying hazards and implementing controls before accidents or incidents occur.

  4. What is a Major Repair as defined by 14 CFR Part 43?

    Answer: A repair that might appreciably affect structural strength, flight characteristics, or airworthiness

    A Major Repair is defined as one that might appreciably affect structural strength, flight characteristics, powerplant operation, flight safety, or other airworthiness qualities.

  5. Which personal protective equipment (PPE) is required when working with aircraft hydraulic fluid (Skydrol)?

    Answer: Chemical-resistant gloves and splash goggles

    Skydrol is a highly corrosive phosphate ester fluid that requires chemical-resistant gloves and splash goggles to prevent skin burns and eye injuries.

  6. What action must be taken when a technician discovers a defect beyond the scope of authorized work during an inspection?

    Answer: Stop work and notify the appropriate supervisory or certifying authority

    When a technician discovers a defect outside their authorized scope, they must stop and notify the supervising or certifying authority to ensure proper disposition.