Practice Test Geeks(CAS) Certified Apartment Supplier Specialist Practice Test
← All CAS Flashcard Decks

CAS Product Knowledge and Specification for Apartment Suppliers Flashcards

6 cards from real CAS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 CAS Product Knowledge and Specification for Apartment Suppliers flashcards as text

  1. Which ASTM standard is most commonly referenced for testing the slip resistance of tile flooring in multifamily common areas?

    Answer: ASTM C1028

    ASTM C1028 measures the static coefficient of friction for ceramic tile, which determines slip resistance for safe use in wet and dry multifamily common areas.

  2. A supplier's light fixture is rated IP44. What does this ingress protection rating indicate?

    Answer: Protected against solid objects over 1mm and against splashing water

    IP44 means the fixture is protected against solid objects greater than 1mm (first digit 4) and against water splashing from any direction (second digit 4).

  3. When specifying HVAC equipment for individual apartment units, what does SEER rating measure?

    Answer: Seasonal Energy Efficiency Ratio for cooling efficiency

    SEER (Seasonal Energy Efficiency Ratio) measures an air conditioner's cooling output divided by its electrical energy input over a typical cooling season.

  4. Which type of countertop material offers the best combination of heat resistance and low maintenance for multifamily kitchens?

    Answer: Quartz engineered stone

    Quartz engineered stone is non-porous, heat-resistant, scratch-resistant, and requires no sealing, making it the most practical choice for multifamily kitchens needing durability with low maintenance.

  5. What is the primary purpose of a product's Section 01630 in a construction specification?

    Answer: To list approved substitution procedures for specified products

    Section 01630 of a construction specification defines the procedures and approval criteria for substituting alternative products when the specified product is unavailable.

  6. A multifamily owner requests that all paint products used comply with South Coast AQMD Rule 1113. What does this require?

    Answer: Paint must meet low-VOC content limits to reduce air pollution

    South Coast AQMD Rule 1113 sets maximum VOC (volatile organic compound) content limits for architectural coatings to reduce smog-forming emissions in air quality management districts.