CAR Safety Procedures & PPE 3

Question 1

Which ANSI standard governs the selection and use of eye and face protection in the workplace?

Accepted Answer

ANSI Z87.1

Answer

ANSI Z87.1 is the standard for occupational eye and face protection devices, including safety glasses, goggles, and face shields.

Question 2

Before dismantling a refrigerator that still contains refrigerant, the FIRST step a CAR-certified technician must take is:

Accepted Answer

Recover the refrigerant using certified EPA 608 equipment

Answer

EPA Section 608 regulations prohibit venting refrigerants; all refrigerant must be recovered with certified equipment before any disassembly begins.

Question 3

What is the correct disposal method for PCB-containing capacitors found in older appliances?

Accepted Answer

Manage as hazardous waste under TSCA regulations and send to a licensed facility

Answer

PCBs are regulated under the Toxic Substances Control Act (TSCA) and must be managed as hazardous waste and sent to a TSCA-permitted facility.

Question 4

A worker is splashed in the eyes with compressor oil. The immediate first aid response is to:

Accepted Answer

Flush eyes continuously with water for at least 15 minutes

Answer

OSHA and first aid guidelines require immediate and continuous eye flushing for at least 15 minutes following chemical splash exposure.

Question 5

Lockout/Tagout (LOTO) procedures are required under which OSHA standard when servicing appliances with stored electrical energy?

Accepted Answer

29 CFR 1910.147

Answer

OSHA 29 CFR 1910.147 — the Control of Hazardous Energy standard — requires LOTO procedures to protect workers from unexpected energization.

(CAR) Certified Appliance Recycler Practice Test