CAR - Certified Automotive Recycler Workplace Safety and OSHA Questions and Answers 1

Question 1

According to OSHA's Hazard Communication Standard (HCS), which of the following is a primary requirement for all employers with hazardous chemicals in their workplace?

Accepted Answer

To have Safety Data Sheets (SDS) for their exposed workers and provide appropriate training.

Answer

OSHA's Hazard Communication Standard (HCS) mandates that employers must maintain a safety data sheet (SDS) for each hazardous chemical in the workplace. Additionally, they are required to train employees on the potential hazards and safe handling procedures for these chemicals.

Question 2

An employee at an auto recycling facility is about to perform maintenance on a car crusher. To comply with OSHA's Lockout/Tagout (LOTO) standard, what is the critical first step the employee must take after notifying affected personnel?

Accepted Answer

Shut down the equipment using the normal stopping procedure.

Answer

The Lockout/Tagout (LOTO) procedure requires a specific sequence of steps to ensure safety. After notifying affected employees, the authorized employee must de-energize the equipment by shutting it down using its established procedure before applying any locks or tags.

Question 3

Which of the following pieces of Personal Protective Equipment (PPE) is most essential for an employee who is draining fluids from a vehicle and is at risk of splashes from liquids like gasoline, antifreeze, and battery acid?

Accepted Answer

Safety goggles or face shield

Answer

OSHA requires employers to provide appropriate eye or face protection when employees are exposed to hazards from liquid chemicals, acids, or caustic liquids. While other PPE is important for different tasks in a salvage yard, safety goggles or a face shield directly protect the eyes and face from chemical splashes, which is the primary hazard described.

Question 4

An auto recycling yard uses a forklift to move crushed car cubes. According to OSHA regulations, how often must this forklift be inspected?

Accepted Answer

At the beginning of each shift or daily if used around the clock.

Answer

OSHA standard 29 CFR 1910.178(q)(7) requires that all powered industrial trucks, including forklifts, must be examined at least daily before being placed in service. For vehicles used on a round-the-clock basis, they must be examined after each shift.

Question 5

A small oil spill occurs in the dismantling area of an automotive recycling facility. Which of the following is a key component of an OSHA-compliant spill response?

Accepted Answer

Having an established spill containment and cleanup program and trained employees.

Answer

OSHA requires employers who handle hazardous materials to have an effective spill containment program, which includes having necessary supplies (like spill kits) and ensuring employees are trained on how to respond safely to a spill.

(CAR) Certified Automotive Recycler Practice Test

(CAR) Certified Automotive Recycler Practice Test

CAR - Certified Automotive Recycler Workplace Safety and OSHA Questions and Answers 1