Practice Test Geeks(CAR) Certified Appliance Recycler Practice Test
← All CAR Flashcard Decks

Safety Procedures & PPE Flashcards

7 cards from real CAR practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety Procedures & PPE flashcards as text

  1. Which ANSI standard governs the selection and use of eye and face protection in the workplace?

    Answer: ANSI Z87.1

    ANSI Z87.1 is the standard for occupational eye and face protection devices, including safety glasses, goggles, and face shields.

  2. Before dismantling a refrigerator that still contains refrigerant, the FIRST step a CAR-certified technician must take is:

    Answer: Recover the refrigerant using certified EPA 608 equipment

    EPA Section 608 regulations prohibit venting refrigerants; all refrigerant must be recovered with certified equipment before any disassembly begins.

  3. What is the correct disposal method for PCB-containing capacitors found in older appliances?

    Answer: Manage as hazardous waste under TSCA regulations and send to a licensed facility

    PCBs are regulated under the Toxic Substances Control Act (TSCA) and must be managed as hazardous waste and sent to a TSCA-permitted facility.

  4. A worker is splashed in the eyes with compressor oil. The immediate first aid response is to:

    Answer: Flush eyes continuously with water for at least 15 minutes

    OSHA and first aid guidelines require immediate and continuous eye flushing for at least 15 minutes following chemical splash exposure.

  5. Lockout/Tagout (LOTO) procedures are required under which OSHA standard when servicing appliances with stored electrical energy?

    Answer: 29 CFR 1910.147

    OSHA 29 CFR 1910.147 — the Control of Hazardous Energy standard — requires LOTO procedures to protect workers from unexpected energization.

  6. Which noise level (dBA TWA) triggers OSHA's requirement for a Hearing Conservation Program in recycling facilities?

    Answer: 85 dBA

    OSHA requires a Hearing Conservation Program when workers are exposed to noise at or above an 85 dBA 8-hour TWA action level.

  7. When using a forklift to move stacked appliances in a recycling facility, the load should be carried at what height during travel?

    Answer: 6 inches to 12 inches off the ground

    Forklifts must travel with loads lowered to 6–12 inches above the ground to maintain stability and visibility.