Practice Test Geeks(CAR) Certified Appliance Recycler Practice Test
← All CAR Flashcard Decks

Code Compliance & Standards Flashcards

7 cards from real CAR practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Code Compliance & Standards flashcards as text

  1. State regulations governing appliance recycling programs often require that demanufacturing facilities obtain which type of environmental permit?

    Answer: Solid waste handler or transfer station permit

    Most state environmental agencies require appliance demanufacturing and recycling facilities to hold a solid waste handler or transfer station permit.

  2. Under which section of RCRA are PCB-containing capacitors found in old appliances regulated as hazardous waste?

    Answer: RCRA Subtitle C via TSCA cross-reference

    PCBs are primarily regulated under TSCA Section 6, but PCB-containing waste that is also hazardous falls under RCRA Subtitle C jurisdiction.

  3. A recycling facility processes 150 appliances per day. Under which EPA generator category would it most likely fall for hazardous waste purposes?

    Answer: Small Quantity Generator (SQG)

    Facilities generating between 100 kg and 1,000 kg of hazardous waste per month are classified as Small Quantity Generators with specific compliance requirements.

  4. Which standard, published by the Association of Home Appliance Manufacturers (AHAM), defines test procedures for measuring refrigerator and freezer energy consumption?

    Answer: AHAM HRF-1

    AHAM HRF-1 establishes performance evaluation methods for household refrigerators, refrigerator-freezers, and freezers, including energy testing.

  5. EPA's Section 608 regulations require that refrigerant recovery equipment used on appliances manufactured before November 15, 1993 meet which recovery efficiency standard?

    Answer: EPA self-certification by the manufacturer

    EPA allows recovery equipment manufactured before November 15, 1993 to be used if the manufacturer has self-certified that it meets EPA recovery efficiency requirements.

  6. Which of the following best describes the purpose of the 'safe disposal exemption' under EPA Section 608 regulations?

    Answer: It exempts final disposal of small appliances from recovery requirements if certain conditions are met

    The safe disposal exemption allows refrigerant in small appliances to be released during final disposal only if the appliance is going to a certified appliance recycler who recovers it.

  7. When recycling appliances under a utility-sponsored program, what additional compliance step is often required that exceeds minimum federal requirements?

    Answer: Program audits and weight-based reporting to the utility sponsor

    Utility-sponsored recycling programs typically require detailed reporting on materials recovered and program audits to verify compliance with program specifications.