Quality Assurance & Compliance Flashcards
7 cards from real CAPS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Quality Assurance & Compliance flashcards as text
Under the ADA, which of the following is NOT one of the four accessibility design requirements for new multifamily construction?
Answer: At least one accessible unit per floor in all buildings
The Fair Housing Act's seven design requirements do not mandate one accessible unit per floor; instead, they require all covered units to meet basic accessibility features.
A CAPS specialist is reviewing a contractor's work and finds that a ramp was built with a 1:10 slope instead of the required 1:12. What does this mean for the client?
Answer: The ramp is steeper than permitted and may be unsafe for wheelchair users
A 1:10 slope is steeper than the maximum permitted 1:12 ratio, making the ramp more difficult and potentially unsafe for wheelchair users.
What is the primary purpose of requiring a client signature on a project scope-of-work document before modifications begin?
Answer: To establish mutual agreement on the work to be performed and protect all parties
A signed scope-of-work document establishes shared understanding and agreement on project details, protecting both the client and the professional from disputes.
Which standard governs the minimum width of doorways in accessible residential design under most U.S. building codes?
Answer: 32 inches clear width
Most accessibility standards require a minimum 32 inches of clear width for doorways, with 36 inches preferred for better accessibility.
A CAPS specialist notices that a newly installed stair lift does not have obstruction sensors on the footrest. What compliance concern does this raise?
Answer: A potential UL or ASME A18.1 safety standard non-compliance
Stair lifts must meet ASME A18.1 or UL safety standards, which include requirements for obstruction sensors to prevent entrapment injuries.
When should a CAPS specialist conduct a final quality inspection relative to the client moving in or resuming use of the modified space?
Answer: Before the client uses the modified space and before final payment is released
Final quality inspections must occur before client use and before releasing final payment to ensure all work meets standards and is safe for occupancy.
What does the term 'visitability' refer to in accessible housing standards?
Answer: A basic level of accessibility that allows people with disabilities to visit a home
Visitability refers to a minimum level of accessibility—typically one zero-step entrance, wide doorways, and a half-bath on the main floor—that allows people with disabilities to visit a home.