Free CAOHC Hearing Protection Device Fitting Questions and Answers 1

Question 1

An employee consistently fails their annual hearing test, showing a persistent Standard Threshold Shift (STS). They state they are using their issued foam earplugs correctly. During a fitting assessment, you observe them pushing the earplug straight into the ear canal without any other steps. What is the MOST critical initial step to correct their fitting technique?

Accepted Answer

Advising them to pull the outer ear (pinna) up and back before insertion.

Answer

To ensure a proper fit for an earplug, the ear canal must be straightened. The most effective way to do this is by reaching over the head with the opposite hand and pulling the pinna (outer ear) up and back. This action opens the ear canal, allowing for deeper and more effective insertion of the earplug. While rolling the plug is also a crucial step, straightening the canal is paramount for overcoming the natural bends that can otherwise block the plug from being inserted correctly.

Question 2

According to OSHA regulations, which of the following is a mandatory requirement for employers regarding hearing protection devices (HPDs) when a hearing conservation program is required?

Accepted Answer

Ensure proper initial fitting and supervise the correct use of all HPDs.

Answer

OSHA standard 29 CFR 1910.95(i)(5) explicitly states that 'The employer shall ensure proper initial fitting and supervise the correct use of all hearing protectors.' While fit-testing is considered a best practice by OSHA and NIOSH, it is not a mandatory requirement under the current standard. The requirement is to offer a 'variety of suitable' protectors, not a specific number of brands, and replacement is done 'as necessary', not on a fixed schedule.

Question 3

During an otoscopic screening prior to an HPD fitting, you observe that an employee's right ear canal is completely blocked by cerumen (earwax). What is the appropriate course of action?

Accepted Answer

Fit the employee with earmuffs as a temporary measure and refer them to a medical professional.

Answer

An Occupational Hearing Conservationist's (OHC) scope of practice does not include removing impacted cerumen. Attempting to do so is unsafe and outside of their training. When an occluding condition is identified, the correct procedure is to fit the employee with a non-insertive HPD like earmuffs to ensure they are protected, and then refer them to a physician or audiologist for evaluation and management of the cerumen. Fitting any insert-style plug would be ineffective and potentially harmful.

Question 4

Which of the following is a key advantage of conducting individual hearing protector fit-testing, such as calculating a Personal Attenuation Rating (PAR), over simply relying on the manufacturer's Noise Reduction Rating (NRR)?

Accepted Answer

A PAR provides a real-world measure of the attenuation a specific worker achieves.

Answer

The Personal Attenuation Rating (PAR) is a measure of the actual noise reduction a specific individual achieves with a particular HPD, as they wear it. This contrasts with the NRR, which is derived from laboratory testing under ideal conditions and may not reflect real-world performance due to factors like poor fit or incorrect insertion. Fit-testing provides a personalized, accurate assessment of protection. The NRR is still a required metric, and fit-testing is a best practice, not a universal mandate.

Question 5

A worker you are fitting for roll-down foam earplugs successfully demonstrates the 'roll' and 'pull' steps but complains the plug feels like it's 'hitting a wall' and won't go in further. Upon removal, the earplug is bent in a U-shape. This most likely indicates:

Accepted Answer

The worker is not pulling their pinna in the correct direction to straighten the ear canal.

Answer

When an earplug bends upon insertion, it often means it is hitting the wall of the ear canal instead of following its path. While ear canal size can be a factor, the primary cause is often an improperly straightened ear canal. The direction of the pinna pull (up and back, or sometimes straight out) is individual. The OHC should observe the worker's ear and coach them on which pull direction most effectively opens their specific ear canal to allow for deeper, correct insertion.

CAOHC - Council for Accreditation in Occupational Hearing Conservation Practice Test

CAOHC - Council for Accreditation in Occupational Hearing Conservation Practice Test

Free CAOHC Hearing Protection Device Fitting Questions and Answers 1