Practice Test Geeks(CAL) Certified Automotive Locksmith Practice Test
← All CAL Flashcard Decks

Key Programming and Remotes Flashcards

7 cards from real CAL practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Key Programming and Remotes flashcards as text

  1. What is a rolling code (hopping code) in the context of remote keyless entry systems?

    Answer: A pseudo-random code that changes with every button press, synchronized between fob and receiver

    Rolling codes use an algorithm (e.g., KeeLoq) to generate a new code each press; both the fob and receiver advance the counter together, preventing replay attacks.

  2. A locksmith is programming a push-to-start smart key for a Toyota vehicle and is prompted for a 'maker code.' What does this refer to?

    Answer: A seed-key or security access code required by the vehicle's immobilizer before programming can proceed

    Many Toyota (and other OEM) systems require a seed-key security access exchange — the tool requests a seed from the ECU and computes the correct key response — before allowing transponder or smart key programming.

  3. Which of the following best describes a 'crypto transponder' compared to a fixed-code transponder?

    Answer: A crypto transponder uses an encrypted rolling challenge-response; a fixed transponder broadcasts a static ID every time

    Crypto transponders (e.g., Megamos 48, DST80) perform a mutual authentication using encrypted challenge-response protocols, making simple cloning impossible without the secret key.

  4. When would a locksmith use the 'pin code' method to program a key versus the OBD method?

    Answer: Pin code is used when OBD access is blocked by a faulty DLC or when the vehicle's security requires a PIN before OBD programming is allowed

    Some vehicles require the 4-digit or 5-digit security PIN to unlock the immobilizer for programming, and others may have a damaged DLC that forces the technician to use an alternative pin-based entry.

  5. What is the purpose of an immobilizer bypass module in remote start installations?

    Answer: It stores a programmed transponder signal and presents it to the ECU so the engine can start without the original key present

    A bypass module learns the transponder signal from a key left inside it and re-presents that signal to the vehicle's immobilizer ring during remote start, satisfying the security system.

  6. A customer reports their OEM key fob unlocks the doors but the transponder does not start the vehicle. What is the most likely diagnosis?

    Answer: The transponder chip inside the key is damaged or has lost its programming

    Since the RF portion (lock/unlock) works, the battery is fine; a separate transponder chip failure or lost programming explains why the immobilizer rejects the key during start.

  7. What does 'all keys lost' (AKL) programming mean for a locksmith?

    Answer: A situation where no working key exists for the vehicle, requiring the immobilizer to be initialized from scratch to accept a new key

    AKL means the owner has no functional key; the locksmith must use EEPROM reading, OBD pin extraction, or specialized tools to re-initialize the immobilizer and program at least one new key.