Damage Analysis and Inspection Flashcards
7 cards from real CAADE practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Damage Analysis and Inspection flashcards as text
A vehicle has been repaired and repainted, but the appraiser notices the new paint has a slightly different texture (orange peel) compared to adjacent panels. This most likely indicates:
Answer: A previous collision repair using non-OEM refinishing standards
Texture differences between adjacent panels typically indicate a refinish repair, as factory paint application produces consistent orange peel across the entire vehicle.
Which condition describes inward buckling of the firewall or front floor pan caused by a severe frontal collision?
Answer: Mash
Mash damage refers to a shortening or crushing of the front structure, often accompanied by firewall intrusion and floor pan buckling.
An appraiser using a UV light source during inspection is primarily looking for:
Answer: Repainted areas or body filler repairs
UV light can reveal overspray, repainted panels, and body filler repairs that are not visible under normal lighting conditions.
When a vehicle sustains a rear-end collision, which structural component is most critical to inspect for hidden damage in a unibody design?
Answer: Rear frame rails and spare tire well
The rear frame rails and spare tire well absorb and transfer crash energy in a unibody vehicle, making them prone to hidden crush and buckling.
A vehicle's door opens and closes properly but shows uneven gaps at the top versus the bottom of the door aperture. This condition most likely indicates:
Answer: Hinge pillar or rocker panel distortion
Parallelogram-shaped door apertures (tapered gaps top vs. bottom) indicate distortion in the surrounding structure, such as the hinge pillar or rocker.
During inspection, an appraiser discovers undercoating has been freshly applied to only the rear underbody. This is a red flag indicating:
Answer: Possible rear collision repair concealing structural work
Selective fresh undercoating in only one area is a classic technique used to conceal structural repairs, weld seams, or corrosion from prior damage.
Which measurement on a vehicle's body indicates 'sway' damage condition?
Answer: Left-to-right width measurements are unequal across the front or rear
Sway damage is identified when the front or rear of the vehicle has shifted laterally, causing unequal left-to-right width measurements.