CAADE - Certified Automotive Appraisal and Damage Estimator Damage Analysis and Inspection Questions and Answers

Question 1

An estimator is inspecting a vehicle that sustained a front-end collision.
The doors do not align properly with the B-pillars, and there are uneven gaps between the hood and fenders.
What type of damage is most likely indicated by these observations?

Accepted Answer

Sway damage

Answer

Mash damage

Answer

Cosmetic panel damage

Answer

Twist damage

Question 2

During a preliminary damage inspection, which of the following steps is essential to perform before conducting a detailed analysis of individual parts?

Accepted Answer

Check for fluid leaks and note the odometer reading.

Answer

Verify the paint code and finish type.

Answer

Disassemble the damaged area to check for hidden damage.

Answer

Connect a diagnostic scanner to check for trouble codes.

Question 3

Which of the following scenarios would make a vehicle's dent INELIGIBLE for Paintless Dent Repair (PDR)?

Accepted Answer

A moderate dent on the quarter panel where the paint is cracked and flaking.

Answer

A shallow, round dent on a flat section of the door panel.

Answer

Multiple small dents on the hood from a recent hailstorm.

Answer

A minor ding located in the center of the roof panel.

Question 4

A vehicle was involved in a head-on collision. The estimator notes that the front frame rails appear crumpled and the overall length of the front end is shorter than the manufacturer's specifications. This type of structural damage is best described as:

Accepted Answer

Mash damage

Answer

Twist damage

Answer

Sway damage

Answer

Sag damage

Question 5

When inspecting a vehicle for structural damage, which tool is specifically designed to detect subsurface defects in composite materials like carbon fiber bumpers or body panels without causing damage?

Accepted Answer

Ultrasonic Flaw Detector

Answer

Paint Thickness Gauge

Answer

Digital Micrometer

Answer

Laser Measuring System

Question 6

During the damage analysis process, a 'supplement' is written to:

Accepted Answer

Update the original estimate with additional damage found after teardown.

Answer

Document the customer's initial statement about the accident.

Answer

Provide a preliminary estimate before the vehicle is inspected.

Answer

Authorize the initial teardown of the vehicle.

An estimator is inspecting a vehicle that sustained a front-end collision.The doors do not align properly with the B-pillars, and there are uneven gaps between the hood and fenders.What type of damage is most likely indicated by these observations?

An estimator is inspecting a vehicle that sustained a front-end collision.
The doors do not align properly with the B-pillars, and there are uneven gaps between the hood and fenders.
What type of damage is most likely indicated by these observations?