CA Flagger Legal Requirements 4

Question 1

Which California law specifically prohibits a driver from speeding through a construction zone and doubles the normal fine?

Accepted Answer

California Vehicle Code Section 22362

Answer

California Vehicle Code Section 22349

Answer

Caltrans Construction Safety Order 1600

Answer

Cal/OSHA Standard 1598

Question 2

When a flagger is stationed at a location where two-way traffic is squeezed into one lane, the legal maximum time one direction may be held:

Accepted Answer

Is set by the Traffic Control Plan for the specific project

Answer

Is unlimited as long as traffic is light

Answer

Is always 5 minutes regardless of conditions

Answer

Is determined solely by the flagger's judgment

Question 3

According to California regulations, which of the following is a legal requirement for the STOP/SLOW paddle used by flaggers?

Accepted Answer

It must meet MUTCD retroreflective specifications

Answer

It must be at least 18 inches in diameter

Answer

It must be painted bright orange on both sides

Answer

It must be mounted on a fixed pole, never hand-held

Question 4

Under California law, who bears legal responsibility for ensuring that all flaggers on a project are properly certified?

Accepted Answer

The prime contractor

Answer

The individual flagger only

Answer

The local traffic authority

Answer

Cal/OSHA inspectors

Question 5

A flagger in California working on a state highway project is required to keep their certification card:

Accepted Answer

On their person while flagging

Answer

At the project office in a binder

Answer

Filed with Cal/OSHA before the project starts

Answer

At the nearest CHP office

Question 6

Under California law, if a motorist strikes and injures a properly positioned flagger in a work zone, the motorist is subject to:

Accepted Answer

Enhanced criminal penalties under CVC 21960

Answer

Civil liability only, no criminal charges

Answer

Only a standard traffic citation

Answer

No additional penalties beyond normal accident law

Question 7

Which regulatory body has the authority to conduct unannounced inspections of active California construction work zones to verify flagger compliance?

Accepted Answer

Cal/OSHA compliance officers

Answer

Only the project owner

Answer

Caltrans engineers only

Answer

Local police departments only