C33 Practice Test Video Answer

1. B
Proper surface preparation ensures adhesion and regulatory compliance.

2. B
Moisture meters confirm compliance with manufacturer specifications.

3. C
The EPA RRP rule governs lead-safe practices in pre-1978 homes.

4. C
Hands-on practice with feedback supports adult learning.

5. C
Natural bristle brushes are best for oil-based paints.

6. B
OSHA requires fall protection or guardrails on scaffolds above 10 feet.

7. B
Adults learn best with real-world problem solving.

8. B
Primer improves adhesion and provides a uniform base.

9. B
Constructive feedback and goal setting encourage growth.

10. B
Low-VOC paints reduce harmful emissions and improve safety.

11. B
Overlapping passes at consistent distance minimizes overspray.

12. A
Force Majeure clauses address uncontrollable delays like weather.

13. B
OSHA HazCom requires training on hazardous materials.

14. A
Primer, base coat, top coat is the proper sequence.

15. C
Back-rolling improves adhesion on textured surfaces.

16. B
Observation of performance is key for competency-based evaluation.

17. C
Semi-gloss or satin enamel resists moisture in bathrooms.

18. A
Section 7159 requires written contracts for jobs over $500.

19. C
Paints must be stored in flammable cabinets away from heat.

20. B
Real swatch practice applies adult learning principles.

21. B
Leftover latex paint must be disposed as hazardous waste.

22. B
JHA includes job steps, hazards, and safety controls.

23. B
Epoxy requires accurate mixing, stirring, and induction time.

24. B
Combining verbal and hands-on teaching is most effective.

25. B
Confined space spraying requires supplied-air respirators.

26. B
Galvanized metal must be cleaned, etched, and primed.

27. B
MSDS provides safety and hazard communication details.

28. B
Ongoing formative feedback ensures continuous improvement.

29. B
Roller nap length is chosen based on surface texture.

30. C
Minimum temperature for curing is typically 50°F.

31. B
Job logs and photos protect against disputes.

32. B
Maintaining a wet edge prevents lap marks.

33. B
Guided reflection and collaboration improve skill retention.