BMW X5 Inspection & Quality Control 2

Question 1

During a BMW X5 vehicle inspection, which tool is used to verify proper torque on wheel lug bolts after a tire rotation?

Accepted Answer

Calibrated click-type torque wrench

Answer

A calibrated click-type torque wrench provides audible confirmation that lug bolts have reached the manufacturer-specified torque value.

Question 2

What does a BMW X5 Vehicle Order (VO) contain that is critical during pre-delivery inspection (PDI)?

Accepted Answer

All factory-ordered options and equipment codes

Answer

The Vehicle Order lists all factory-coded options, allowing the PDI technician to verify every feature is present and functioning.

Question 3

A BMW X5 hood alignment is found to be uneven during quality inspection. Which adjustment point is typically accessed first?

Accepted Answer

Hinge bolts at the body pillar

Answer

Hood hinge bolts at the body pillar allow fore/aft and lateral adjustment of the hood panel to achieve even gaps.

Question 4

During a BMW X5 brake inspection, a technician measures front rotor thickness at 28.5 mm with a minimum spec of 28.4 mm. What is the correct action?

Accepted Answer

Advise customer of wear and document in repair order

Answer

Although technically within minimum spec, rotors this close to the wear limit should be documented and the customer advised for planning purposes.

Question 5

Which BMW X5 system is verified during the 'Function Check' phase of a scheduled inspection to ensure driver safety systems are active?

Accepted Answer

Dynamic Stability Control (DSC)

Answer

DSC and its sub-systems (ABS, CBC, DBC) are safety-critical and must be confirmed operational during every scheduled inspection.

(BMW X5) Certified BMW X5 Technician Practice Test