BMV Vehicle Operations Flashcards
7 cards from real BMV practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 BMV Vehicle Operations flashcards as text
When driving in fog, you should use your:
Answer: Low-beam headlights
Low beams reduce glare and give better visibility in fog than high beams.
What is the first thing you should do if your vehicle begins to skid?
Answer: Ease off the accelerator and steer where you want to go
Easing off the gas and steering into the intended direction helps you recover control of a skid.
How far ahead should a driver ideally scan the road for hazards?
Answer: 10 to 15 seconds
Scanning 10 to 15 seconds ahead gives you time to identify and react to hazards.
When must you dim your high beams for oncoming traffic?
Answer: Within 500 feet of an oncoming vehicle
You must switch to low beams within 500 feet of an approaching vehicle to avoid blinding the driver.
What should you do when following a large truck at night?
Answer: Keep low beams on and increase following distance
Increasing following distance and using low beams prevents glare and gives room to react.
A driver approaching a hill or curve should:
Answer: Not attempt to pass
Passing near hills and curves is dangerous because oncoming traffic may be hidden.
What does hydroplaning mean?
Answer: Tires ride on a film of water and lose road contact
Hydroplaning occurs when tires lose contact with the road surface due to a layer of water.