BICSI Certification BICSI Cabling Infrastructure 1

Question 1

What is the maximum channel length for a Category 6A horizontal cabling run according to ANSI/TIA-568?

Accepted Answer

100 meters

Answer

ANSI/TIA-568 specifies a maximum channel length of 100 meters (328 feet) for Category 6A horizontal cabling.

Question 2

Which BICSI standard is the primary reference for the design and installation of telecommunications cabling systems?

Accepted Answer

TDMM

Answer

The BICSI Telecommunications Distribution Methods Manual (TDMM) is the primary reference for telecommunications cabling design and installation.

Question 3

What does the term 'consolidation point' refer to in structured cabling?

Accepted Answer

An intermediate connection point in the horizontal cabling subsystem

Answer

A consolidation point is an intermediate connection point within the horizontal cabling subsystem, used to allow flexibility in open-office environments.

Question 4

Which pair configuration is used for PoE (Power over Ethernet) in 4-pair power delivery mode (IEEE 802.3bt)?

Accepted Answer

All 4 pairs simultaneously

Answer

IEEE 802.3bt Type 3 and Type 4 PoE uses all 4 pairs simultaneously to deliver up to 90W of power.

Question 5

What is the minimum bend radius for a Category 6A UTP cable during installation?

Accepted Answer

8 times the cable diameter

Answer

The minimum bend radius for Category 6A UTP cable during installation is 8 times the cable outer diameter.

BICSI Certification Practice Test

BICSI Certification Practice Test

BICSI Certification BICSI Cabling Infrastructure 1