← All Bennett Mechanical Test Flashcard Decks

Electricity and Circuits Flashcards

7 cards from real Bennett Mechanical Test practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Electricity and Circuits flashcards as text
  1. Two 6-ohm resistors are connected in parallel. What is the total resistance?

    Answer: 3 ohms

    For two equal resistors in parallel, total resistance is half of one, so 3 ohms.

  2. What is the unit of electrical power?

    Answer: Watt

    Electrical power is measured in watts, equal to volts times amps.

  3. What happens to total resistance when more resistors are added in series?

    Answer: It increases

    Series resistances add together, so total resistance increases with each one.

  4. Which component stores electrical charge?

    Answer: Capacitor

    A capacitor stores charge on its plates and releases it when needed.

  5. What is the power consumed by a device drawing 2 amps at 120 volts?

    Answer: 240 watts

    Power equals voltage times current, so 120 V × 2 A = 240 W.

  6. A diode allows current to flow in how many directions?

    Answer: Only one direction

    A diode permits current flow in only one direction, blocking the reverse.

  7. What is the purpose of a switch in a circuit?

    Answer: To open or close the current path

    A switch opens or closes the circuit to turn current on or off.