BC Real Estate Trading Services Course Building Design and Construction Questions and Answers

Question 1

A real estate licensee is showing a 1980s-era house in a coastal BC community known for its high water table. They notice the house has no basement, and the main floor is elevated about a metre off the ground. Which type of foundation is most likely used for this home?

Accepted Answer

Concrete perimeter with crawlspace

Answer

A concrete perimeter foundation with a crawlspace is a common construction method in British Columbia, especially in areas with high water tables where a full basement is unsuitable. This design elevates the main structure off the ground, protecting it from moisture while providing access to utilities. A slab-on-grade is poured directly on the ground, and post and pier is less common for primary residences.

Question 2

In the context of the BC Building Code, what does the 'R-value' of an insulation material measure?

Accepted Answer

Its resistance to heat flow.

Answer

The R-value is a measure of thermal resistance, indicating how well a material resists the flow of heat. The higher the R-value, the greater the insulating effectiveness. This is a critical factor in a building's energy efficiency as specified in the BC Building Code. The other options describe different material properties like sound transmission class (STC), fire-resistance rating, and density.

Question 3

Which of the following components is a primary vertical load-bearing element in standard wood-frame construction commonly found in British Columbia?

Accepted Answer

Stud

Answer

Studs are the vertical framing members in a wall that transfer structural loads from the top of the wall to the bottom plate. Joists are horizontal members that support floors or ceilings. Rafters are angled members that support the roof. Sheathing is the panel material (like plywood or OSB) that covers the studs and provides lateral stability.

Question 4

A real estate licensee is helping clients purchase a home built in Vancouver in 1975. The clients are concerned about potential hazardous materials. In which of the following materials is asbestos most likely to be found in a home from this era?

Accepted Answer

Textured 'popcorn' ceilings

Answer

In Canada, asbestos was a common additive in many building materials until it was largely phased out through the late 1970s and 1980s. Textured or 'popcorn' ceilings from that era are a very common source of asbestos. PEX piping, vinyl windows, and modern fibreglass insulation are modern materials that do not contain asbestos.

Question 5

What is the primary function of 'flashing' on a residential roof in Canada?

Accepted Answer

To prevent water penetration at joints, valleys, and protrusions.

Answer

Flashing is a critical roofing component, typically made of thin, impervious material like metal. Its sole purpose is to create a watertight seal and prevent water from seeping into the structure at intersections or joints, such as where a chimney, vent pipe, or skylight penetrates the roof. Its function is for water management, not aesthetics, structural support, or ventilation.

BC Real Estate Practice Test

BC Real Estate Practice Test

BC Real Estate Trading Services Course Building Design and Construction Questions and Answers