← All BC ADM Flashcard Decks

Technology in Diabetes Flashcards

7 cards from real BC ADM practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Technology in Diabetes flashcards as text
  1. Which interoperability standard allows diabetes devices from different manufacturers to communicate and share data?

    Answer: Open Protocol for AID (iCGM + ACE pump standards)

    The FDA's iCGM and ACE (Alternate Controller Enabled) pump designations enable interoperability between devices from different manufacturers within automated insulin delivery systems.

  2. A patient reports that her CGM readings are consistently 30–40 mg/dL lower than fingerstick values during the first day of sensor wear. The MOST likely cause is:

    Answer: Sensor initialization lag during the first 24 hours

    Many CGM sensors have a 'break-in' period during the first 24 hours where readings may be less accurate as the sensor equilibrates with interstitial fluid.

  3. Which medication is known to cause falsely elevated glucose readings on CGM sensors using glucose oxidase technology?

    Answer: Acetaminophen (at therapeutic doses)

    Acetaminophen at standard doses can oxidize on glucose oxidase-based sensors and cause falsely elevated CGM readings, a known limitation addressed in newer sensor generations.

  4. What is the primary advantage of implantable CGM sensors (e.g., Eversense) over transcutaneous sensors?

    Answer: Extended wear duration of up to 180 days

    Implantable CGM sensors like the Eversense E3 can be worn for up to 180 days, significantly reducing sensor change frequency compared to 7–14 day transcutaneous options.

  5. When reviewing a patient's pump download, you notice multiple 'no delivery' alarms clustered in the early morning. The MOST appropriate clinical action is:

    Answer: Investigate for kinked cannulas, tunnel lipohypertrophy, or insulin precipitation

    Clustered no-delivery alarms suggest recurrent occlusion, which can result from kinked tubing, lipohypertrophy at the site, or insulin aggregation in the cartridge.

  6. A BC-ADM is counseling a patient on the GMI reported on their CGM. How does GMI differ from HbA1c?

    Answer: GMI is derived from mean sensor glucose over at least 14 days and does not account for red blood cell turnover

    GMI is a formula-derived estimate of average glucose from CGM data that bypasses HbA1c's dependence on red blood cell lifespan, making it useful when hemoglobin variants distort HbA1c.

  7. Which automated insulin delivery system feature is specifically designed to help prevent exercise-induced hypoglycemia?

    Answer: Activity or exercise mode that temporarily raises the glucose target

    Exercise mode (available in several AID systems) temporarily increases the target glucose set point, causing the algorithm to withhold or reduce insulin delivery during physical activity.