AZ-700 Azure ExpressRoute 3

Question 1

When an ExpressRoute circuit and a VPN Gateway coexist in the same VNet, which connection type takes precedence for on-premises traffic by default?

Accepted Answer

ExpressRoute takes precedence

Answer

VPN Gateway always takes precedence

Answer

The connection with the lower latency wins

Answer

Both are used simultaneously via ECMP

Question 2

What does 'circuit resiliency' in ExpressRoute refer to?

Accepted Answer

Deploying redundant physical connections to avoid single points of failure

Answer

The ability to upgrade bandwidth without downtime

Answer

Automatic failover to VPN if ExpressRoute goes down

Answer

BGP session keepalive timers

Question 3

Which Azure feature provides a managed ExpressRoute connection without requiring a dedicated circuit from a provider?

Accepted Answer

ExpressRoute Direct

Answer

ExpressRoute Global Reach

Answer

Azure Virtual WAN with ExpressRoute gateway

Answer

Azure Peering Service

Question 4

What is the billing model for ExpressRoute data transfer by default on the Standard and Premium SKUs?

Accepted Answer

Metered — inbound free, outbound charged per GB

Answer

Unlimited inbound and outbound included

Answer

Metered — both inbound and outbound charged

Answer

Flat monthly rate regardless of usage

Question 5

Which BGP community value should on-premises routers use to identify routes learned from Azure's West US region over Microsoft peering?

Accepted Answer

12076:51006

Answer

12076:51004

Answer

12076:51003

Answer

12076:51001

Question 6

What is required to enable encryption over an ExpressRoute private peering connection?

Accepted Answer

Run a VPN Gateway over the ExpressRoute circuit using IPsec/IKE

Answer

Enable IPsec encryption in the circuit settings

Answer

Use ExpressRoute Premium with encryption add-on

Answer

Configure MACsec at the Direct port layer