AXIS AXIS Access Control & Physical Security 2

Question 1

What is the recommended mounting height for an AXIS door reader to ensure ergonomic use?

Accepted Answer

Approximately 3.5–4 feet (1.0–1.2 meters)

Answer

AXIS door readers are typically mounted at approximately 1 meter from the floor to align with the average person's hand height for comfortable credential presentation.

Question 2

Which wiring protocols are most commonly used to connect AXIS door readers to door controllers?

Accepted Answer

Wiegand or RS-485

Answer

Wiegand and RS-485 are the most common wiring standards for connecting door readers to AXIS controllers in physical access control installations.

Question 3

In a fail-secure configuration for an AXIS access control door, what happens when power is lost?

Accepted Answer

The door remains locked

Answer

In fail-secure mode, the door remains locked when power is lost, maintaining security but requiring emergency egress provisions like manual release mechanisms.

Question 4

What is the purpose of a door position sensor (DPS) in an AXIS access control installation?

Accepted Answer

Monitor whether the door is open or closed and detect door-held-open events

Answer

A door position sensor reports real-time open/closed status to the AXIS controller, enabling detection of forced entry or door-propped-open conditions.

Question 5

Which cable specification is recommended for access control power wiring runs to minimize voltage drop?

Accepted Answer

18 AWG shielded cable for power runs

Answer

18 AWG shielded cable is recommended for access control power wiring because it minimizes voltage drop over longer runs and reduces electromagnetic interference.

(AXIS) AXIS Certified Professional Technicians Practice Test

(AXIS) AXIS Certified Professional Technicians Practice Test

AXIS AXIS Access Control & Physical Security 2