Installation Techniques Flashcards
7 cards from real AWS practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Installation Techniques flashcards as text
When installing a welding machine in an outdoor environment, which protection rating is the minimum recommended for the enclosure?
Answer: IP44
IP44 is the minimum recommended protection rating for welding equipment used outdoors, guarding against solid objects and water splashing from any direction.
What is the correct procedure when installing a welding cable that must pass through a metal conduit?
Answer: Use a conduit fitting with a protective bushing or grommet
A protective bushing or grommet prevents the sharp metal edges of the conduit from abrading and damaging the cable insulation.
During installation, a welder notices the work lead connection point on the workpiece is painted. What should be done?
Answer: Clean the connection area to bare metal before attaching the work lead
Paint is an electrical insulator, so the connection area must be cleaned to bare metal to ensure proper electrical contact and prevent arc instability.
Which factor determines the minimum bend radius when routing welding cables during installation?
Answer: The cable's outside diameter and conductor flexibility
The minimum bend radius is determined by the cable's outside diameter and flexibility to prevent conductor damage and insulation cracking.
When installing a water-cooled welding torch, what must be verified after connecting the cooling lines?
Answer: Flow rate, coolant level, and absence of leaks
After connecting cooling lines, flow rate, coolant level, and leak-free connections must all be verified to prevent torch overheating.
A welding power source is being installed in a location with frequent voltage fluctuations. What accessory should be considered?
Answer: A voltage stabilizer or line conditioner
A voltage stabilizer or line conditioner protects welding equipment from damage caused by primary power fluctuations and ensures consistent output.
What is the purpose of installing an isolation transformer between the primary power supply and a welding machine in a shipyard environment?
Answer: To prevent stray welding currents from causing electrolytic corrosion of the vessel
Isolation transformers in shipyard installations break the galvanic circuit path, preventing stray DC welding currents from accelerating electrolytic corrosion of the hull.