Autodesk Revit Test Autodesk Revit Test Families, Components & Parametric Design 1

Question 1

What are the three types of families in Autodesk Revit?

Accepted Answer

System, Loadable, and In-Place

Answer

Revit families are classified as System Families (walls, floors), Loadable Families (doors, furniture), and In-Place Families (unique one-off geometry).

Question 2

What file extension is used for a Revit Loadable Family?

Accepted Answer

.rfa

Answer

Loadable Families are saved as .rfa files, which can be loaded into any Revit project or template.

Question 3

In the Revit Family Editor, what are 'Reference Planes' used for?

Accepted Answer

Providing construction lines and hosting geometry and dimensions for parametric control

Answer

Reference Planes in the Family Editor serve as construction lines that host dimensions and constrain geometry to enable parametric behavior.

Question 4

What is a 'Type Parameter' in a Revit family?

Accepted Answer

A parameter that is shared across all instances of the same family type

Answer

Type Parameters are shared by all instances of the same family type, so changing the value affects every placed instance of that type simultaneously.

Question 5

What is an 'Instance Parameter' in a Revit family?

Accepted Answer

A parameter that can be set individually for each placed instance

Answer

Instance Parameters can be set independently on each individual element placed in the model, allowing variation between identical type placements.

Autodesk Revit Test Practice Test

Autodesk Revit Test Practice Test

Autodesk Revit Test Autodesk Revit Test Families, Components & Parametric Design 1