AUDI Safety Procedures & PPE 3

Question 1

Which OSHA regulation governs Lockout/Tagout (LOTO) procedures in an automotive service facility?

Accepted Answer

29 CFR 1910.147

Answer

OSHA 29 CFR 1910.147 (Control of Hazardous Energy) establishes LOTO requirements to prevent unexpected energization of machinery during service.

Question 2

What is the minimum recommended eye protection rating (ANSI standard) for safety glasses used in an Audi shop?

Accepted Answer

ANSI Z87.1

Answer

ANSI Z87.1 is the American National Standard for occupational and educational eye and face protection devices used in automotive workshops.

Question 3

A technician is draining engine oil from an Audi. Which PPE is MOST important to prevent chemical burns from hot oil?

Accepted Answer

Nitrile gloves and safety glasses

Answer

Hot engine oil can cause thermal and chemical burns, making nitrile gloves and safety glasses the essential PPE to protect hands and eyes during drainage.

Question 4

What hazard does an Audi hybrid or EV orange high-voltage cable specifically indicate?

Accepted Answer

High-voltage DC or AC electrical conductors

Answer

Orange high-voltage cables in Audi hybrids and EVs mark conductors carrying dangerous high-voltage electricity (typically 400V DC or higher).

Question 5

When lifting an Audi A4 (B9) on a two-post lift, where should the lift arms contact the vehicle?

Accepted Answer

At the reinforced pinch-weld lift points specified in the owner's manual

Answer

Audi specifies reinforced pinch-weld lift points to distribute the vehicle's weight safely without damaging body panels or underbody components.

(AUDI) Audi Certified Mechanic Practice Test

(AUDI) Audi Certified Mechanic Practice Test

AUDI Safety Procedures & PPE 3