AUDI Inspection & Quality Control 3

Question 1

Which Audi quality standard document defines the inspection checkpoints and pass/fail criteria that must be followed during a certified pre-owned (CPO) inspection?

Accepted Answer

Audi Certified Pre-Owned 300-point inspection checklist

Answer

The Audi CPO program requires technicians to complete a standardized multi-point inspection checklist verifying mechanical, safety, and cosmetic criteria before certification.

Question 2

A technician is inspecting an Audi quattro drivetrain after a differential service. Which functional test confirms the rear differential is locking and unlocking correctly on applicable models?

Accepted Answer

Monitor torque split data via ODIS while driving through a low-traction maneuver

Answer

Using ODIS to monitor real-time torque distribution data during a controlled low-traction maneuver confirms the differential is actively managing power split as designed.

Question 3

When inspecting Audi aluminum body panels for damage acceptance criteria, which type of deformation generally requires panel replacement rather than repair?

Accepted Answer

Sharp creases or kinks that have work-hardened the aluminum

Answer

Aluminum work-hardens at sharp creases, making the metal brittle and structurally compromised; Audi repair procedures typically require replacement in these cases.

Question 4

During a final quality inspection, an Audi's headlights are found to be misaimed. What instrument is required to properly set headlight aim to Audi specifications?

Accepted Answer

An approved headlight aiming machine (optical or digital aimer)

Answer

Audi requires the use of an approved optical or digital headlight aiming device to set beam cutoff angles to the published specification.

Question 5

After completing a timing chain replacement on an Audi 2.0T engine, which quality verification step is mandatory before returning the vehicle?

Accepted Answer

Perform a road test log with ODIS to confirm camshaft timing deviation is within specification

Answer

A post-repair ODIS data log confirming camshaft timing deviation values are within tolerance verifies the timing chain installation is correct and no recurrence exists.

(AUDI) Audi Certified Mechanic Practice Test

(AUDI) Audi Certified Mechanic Practice Test

AUDI Inspection & Quality Control 3