Practice Test Geeks(AUDI) Audi Certified Mechanic Practice Test
← All AUDI Flashcard Decks

Safety Procedures & PPE Flashcards

7 cards from real AUDI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Safety Procedures & PPE flashcards as text

  1. When working under a lifted Audi, which additional safety measure should ALWAYS be used alongside a hydraulic floor jack?

    Answer: Place jack stands under the vehicle's designated lift points

    Jack stands must always be placed under the manufacturer-specified lift points whenever a technician works beneath a vehicle — a floor jack alone can fail.

  2. Which type of gloves is most appropriate when handling hot exhaust components on an Audi?

    Answer: Heat-resistant leather or Kevlar gloves

    Heat-resistant leather or Kevlar gloves protect against burns from exhaust manifolds, catalytic converters, and other high-temperature components.

  3. What is the correct procedure before disconnecting the high-voltage battery on an Audi e-tron or Q4 e-tron?

    Answer: Don Class 0 or higher insulated HV gloves and follow the OEM de-energization procedure

    High-voltage systems on EVs require Class 0 (1,000V rated) or higher insulated gloves and strict OEM de-energization steps to prevent electrocution.

  4. Why must safety glasses be worn when using a wire brush attachment on an angle grinder in an Audi workshop?

    Answer: To prevent metal fragments and sparks from causing eye injury

    Angle grinders propel metal fragments, rust, and sparks at high velocity, making ANSI-rated safety glasses essential to prevent serious eye injuries.

  5. What SDS (Safety Data Sheet) section identifies the required PPE for a chemical used in an Audi shop?

    Answer: Section 8 – Exposure Controls/Personal Protection

    Section 8 of the SDS specifically lists recommended engineering controls, exposure limits, and required PPE for each chemical.

  6. An Audi technician notices a small puddle of brake fluid on the shop floor. What is the correct immediate action?

    Answer: Clean it up immediately using absorbent material and dispose of it properly

    Brake fluid spills create a slip hazard and must be cleaned up immediately with absorbent material to prevent injuries and contamination.

  7. When should a respirator with an organic vapor cartridge be used in an Audi workshop?

    Answer: When painting or spraying solvent-based chemicals

    Organic vapor cartridges are required when spraying paints, primers, or solvent-based chemicals that release harmful VOCs into the breathing zone.