Repair & Maintenance Flashcards
7 cards from real AUDI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Repair & Maintenance flashcards as text
When replacing brake fluid on an Audi with an electronic parking brake (EPB), what must be done before compressing the rear caliper pistons?
Answer: Use an EPB service mode via scan tool to retract the caliper
Audi EPB calipers require scan tool activation of service/retract mode to electrically retract the piston before brake work.
Which Audi-specific tool is required to properly align the front subframe during reassembly after engine removal?
Answer: T10096 subframe alignment pins
T10096 alignment pins locate the subframe to the body in the factory position, ensuring correct geometry after reinstallation.
An Audi 2.0T TFSI shows excessive oil consumption. After confirming PCV is functional, what is the next most likely cause?
Answer: Worn piston rings due to ring land carbon buildup
The EA888 2.0T is known for carbon deposits on the piston ring lands causing ring sticking and oil burn.
What is the correct procedure for resetting the service interval indicator on most Audi models after an oil change?
Answer: Use the MMI menu: Car > Service & Checks > Reset Service
Audi's MMI-equipped models reset the service reminder via the Car Settings menu under Service & Checks.
When performing a timing belt replacement on an Audi 1.8T engine, which component is always recommended to be replaced at the same time?
Answer: Water pump, tensioner, and idler rollers
The water pump is driven by the timing belt, and its failure interval matches the belt; replacing it prevents a second teardown.
An Audi A4 B8 develops a clunk from the rear suspension over bumps. Which component is the most common cause on this platform?
Answer: Rear trailing arm bushings
The rear trailing arm (trapezoidal) bushings on the B8 platform are a well-documented wear item that causes clunking over bumps.
What does Audi's Long Life service interval (WIV) system primarily measure to calculate oil change intervals?
Answer: Driving conditions, engine load, temperature, and mileage
Audi's WIV (Wartungsintervall-Verlängerungssystem) calculates service intervals using multiple parameters, not just mileage.