Practice Test Geeks(AUDI) Audi Certified Mechanic Practice Test
← All AUDI Flashcard Decks

Code Compliance & Standards Flashcards

7 cards from real AUDI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Code Compliance & Standards flashcards as text

  1. Which Audi group standard (Norm) specifies the requirements for weld seam quality and repair welding procedures on Audi body structures?

    Answer: VW 01131 (Body Repair Welding Standard)

    VW/Audi internal norm VW 01131 defines welding procedures and quality requirements for body structural repairs on Volkswagen Group vehicles including Audi.

  2. When an Audi technician replaces a wheel bearing on a vehicle equipped with an ABS wheel speed sensor, which regulatory system requires verification of correct sensor operation after repair?

    Answer: FMVSS 126 (Electronic Stability Control)

    FMVSS 126 mandates electronic stability control (ESC) functionality, which relies on ABS wheel speed sensors; post-repair ESC verification ensures continued FMVSS 126 compliance.

  3. An Audi service department stores used motor oil on-site awaiting pickup. Under EPA used oil management standards, what is the maximum on-site storage limit for a generator?

    Answer: 1,000 gallons

    EPA 40 CFR Part 279 allows used oil generators to store up to 55 gallons per container and up to 1,000 gallons total on-site before stricter requirements apply.

  4. Audi's factory repair manual specifies that certain high-strength steel (HSS) panels must NOT be repaired with heat straightening. This restriction is primarily driven by which compliance concern?

    Answer: Maintaining FMVSS 216 (roof crush resistance) structural integrity

    Heating HSS panels degrades their tensile strength, potentially compromising the vehicle's ability to meet FMVSS 216 roof crush resistance and other occupant protection standards.

  5. Which document must Audi technicians reference to ensure a replacement part meets OEM specifications for a safety-critical component under 49 CFR Part 569?

    Answer: Audi ETKA parts catalog with OEM part numbers

    49 CFR Part 569 (Regrooved Tires) and broader NHTSA regulations require safety-critical parts to meet OEM specifications, verified through official parts catalogs like ETKA.

  6. When an Audi e-tron's high-voltage battery is damaged in a collision, which standard guides the safe handling and transportation of the damaged battery pack?

    Answer: DOT 49 CFR Part 173 (Hazardous Materials Transportation)

    Damaged lithium-ion battery packs are classified as hazardous materials under DOT 49 CFR Part 173, requiring specific packaging, labeling, and shipping documentation.

  7. A customer brings in an Audi with a modified ECU tune that has disabled the EGR system. Which regulation is the technician most concerned about in a state with I/M testing?

    Answer: Clean Air Act Section 203 (tampering prohibition)

    Clean Air Act Section 203 prohibits tampering with or defeating any emission control device, making the EGR disable a federal violation subject to significant penalties.