Practice Test Geeks(AUDI) Audi Certified Mechanic Practice Test
← All AUDI Flashcard Decks

Code Compliance & Standards Flashcards

7 cards from real AUDI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 7 Code Compliance & Standards flashcards as text

  1. Which Audi-specific torque specification source takes precedence when a general workshop manual conflicts with an Audi repair information system (ELSA/ETKA)?

    Answer: ELSA/ETKA repair information system

    ELSA/ETKA is Audi's official electronic repair information system and always supersedes general manuals for model-specific torque values.

  2. Under EPA regulations, which refrigerant used in Audi climate systems requires technicians to hold an EPA Section 609 certification before servicing?

    Answer: Both R-134a and R-1234yf

    EPA Section 609 certification is required for handling any motor vehicle refrigerant, including both R-134a and the newer R-1234yf.

  3. When an Audi technician installs a used airbag module from a salvage vehicle, which compliance issue is most immediately relevant?

    Answer: FMVSS 208 safety system integrity

    FMVSS 208 requires occupant restraint systems to meet federal safety standards; used airbag modules may not guarantee compliant deployment performance.

  4. What does SAE J1171 specify in the context of Audi marine and automotive component testing?

    Answer: External combustion engine starting motor standards

    SAE J1171 covers external combustion engine starting motors, establishing performance and test standards applicable to starter motor components.

  5. Which organization issues the certification that Audi dealership technicians must hold to legally perform high-voltage work on e-tron vehicles in the US?

    Answer: Audi-specific HV qualification through Audi Academy

    Audi requires technicians to complete Audi Academy high-voltage qualification training before performing any work on e-tron HV systems.

  6. According to OSHA 1910.147, before a technician removes an Audi transmission for rebuild, which procedure must be completed?

    Answer: Lockout/Tagout of energy sources

    OSHA 1910.147 (Lockout/Tagout) requires isolation and locking out all hazardous energy sources before servicing equipment that could release stored energy.

  7. When disposing of Audi brake fluid, which classification under RCRA most commonly applies if the fluid is contaminated with heavy metals from brake wear?

    Answer: Hazardous waste (characteristic)

    Brake fluid contaminated with heavy metals from brake system wear may exhibit toxicity characteristics, classifying it as hazardous waste under RCRA.