ASVAB Assembling Objects Test 3 — Questions and Answers
Question 1: In an AO shape-assembly question, you are given a parallelogram cut diagonally into two triangles. Which answer choice would be INCORRECT when reassembled?
- A parallelogram
- A rectangle (if the diagonal was perpendicular)
- A triangle twice the original size
- A hexagon (Correct answer)
Correct answer: A hexagon
Two triangles from a split parallelogram cannot form a hexagon; they reform the original parallelogram or a rectangle.
Question 2: A connector question shows a line that must run from a dot on piece A's upper edge to a dot on piece B's lower edge. The correct assembled image will have:
- Piece B floating to the side of piece A
- Piece B attached below piece A via the connecting line (Correct answer)
- Piece A inverted over piece B
- The line running parallel between the two pieces
Correct answer: Piece B attached below piece A via the connecting line
Upper edge of A connects via line to lower edge of B, so B hangs below A.
Question 3: If a puzzle piece has a straight edge on one side and an irregular notch on the other three sides, which position is most likely correct for that piece in the final assembly?
- Center of the assembled shape
- Anywhere, since notch pieces are universal
- Along the outer border of the assembled shape (Correct answer)
- Flipped face-down in the interior
Correct answer: Along the outer border of the assembled shape
A straight edge typically forms the outer boundary of the assembled shape, placing that piece on the border.
Question 4: An Assembling Objects question shows three pieces that together should form an 'L' shape. One triangular piece appears to be a distractor. How do you identify the distractor?
- It is the largest piece
- Its edges do not match any edge of the other pieces (Correct answer)
- It is darker in shading
- It appears first in the list
Correct answer: Its edges do not match any edge of the other pieces
A distractor piece has edges that cannot align with the remaining pieces to form the target shape.
Question 5: Two identical right-isosceles triangles are shown separately. When their hypotenuses are placed together, the result is:
- A larger right-isosceles triangle
- A square (Correct answer)
- A pentagon
- A parallelogram
Correct answer: A square
Two congruent right-isosceles triangles joined hypotenuse-to-hypotenuse form a square.
Question 6: In a connector problem, piece A has a dot at its bottom edge and piece B has a dot at its bottom edge. A line connects these two dots. What does the assembled figure look like?
- The two pieces stand upright with a line arcing below them
- The pieces are placed with their bottoms toward each other, connected by the line (Correct answer)
- The pieces are stacked on top of each other
- The pieces face the same direction in a row
Correct answer: The pieces are placed with their bottoms toward each other, connected by the line
Both dots are on the bottom edges, so the line connects the bottoms, pulling the two pieces toward each other base-to-base.
Question 7: When practicing the ASVAB Assembling Objects subtest, which strategy helps most for connector-type questions?
- Count the sides of each shape first
- Locate both dots and trace where the connecting line would run (Correct answer)
- Focus only on the largest shape
- Guess based on which answer looks most complex
Correct answer: Locate both dots and trace where the connecting line would run
Finding both dots and mentally drawing the connecting line quickly eliminates wrong answer choices.
ASVAB Assembling Objects Test 3
In an AO shape-assembly question, you are given a parallelogram cut diagonally into two triangles.
Which answer choice would be INCORRECT when reassembled?