ASUS Network & Connectivity Solutions 3

Question 1

What is the correct procedure to factory reset an ASUS router using the physical reset button?

Accepted Answer

Hold the reset button for 5–10 seconds while the router is powered on until the power LED blinks

Answer

To factory reset an ASUS router, press and hold the reset button for 5–10 seconds while powered on; the power LED blinking indicates the reset is in progress.

Question 2

A client reports that devices connected to the ASUS router are getting 169.254.x.x IP addresses. What is the most likely cause?

Accepted Answer

The router's DHCP server is disabled or not functioning properly

Answer

A 169.254.x.x address is an APIPA address assigned when a device cannot reach a DHCP server, indicating the router's DHCP server is off or unreachable.

Question 3

When configuring port forwarding on an ASUS router, which piece of information is NOT required?

Accepted Answer

The ISP's gateway MAC address

Answer

Port forwarding requires the local IP, external port, and internal port — the ISP gateway's MAC address is not needed for this configuration.

Question 4

Which ASUS router feature displays real-time and historical data about bandwidth usage per connected device?

Accepted Answer

Traffic Analyzer

Answer

The Traffic Analyzer in ASUS router firmware provides real-time and historical per-device bandwidth usage statistics to help identify heavy consumers.

Question 5

A technician notices a customer's ASUS router has excessive wireless interference. Which channel selection approach is recommended for the 2.4 GHz band to minimize overlap?

Accepted Answer

Use channels 1, 6, or 11 as they are the only non-overlapping channels

Answer

In the 2.4 GHz band, channels 1, 6, and 11 are the only three non-overlapping channels, making them the standard recommendation to avoid co-channel interference.

(ASUS) ASUS Certified Practice Test

(ASUS) ASUS Certified Practice Test

ASUS Network & Connectivity Solutions 3