Practice Test Geeks(ASP) Associate Safety Professional Practice Test
← All ASP Flashcard Decks

ASP Construction Safety and Fall Protection Flashcards

6 cards from real ASP practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 ASP Construction Safety and Fall Protection flashcards as text

  1. Under OSHA 29 CFR 1926.451, what is the minimum design load capacity that classifies a scaffold as light-duty?

    Answer: 25 psf

    OSHA classifies light-duty scaffolds as those designed to carry loads up to 25 psf; medium-duty is rated at 50 psf.

  2. Who must inspect scaffolding before each work shift and after any event that could affect its structural integrity?

    Answer: A competent person

    OSHA requires a competent person to inspect scaffolding before each work shift and after any occurrence affecting its structural integrity.

  3. Under OSHA scaffold standards, scaffolds must be capable of supporting at least how many times their maximum intended load?

    Answer: 4 times

    OSHA 29 CFR 1926.451 requires scaffolds to be designed and constructed to support at least 4 times the maximum intended load.

  4. At what height above the lower level does OSHA require guardrails to be installed on scaffold work platforms?

    Answer: 10 feet

    OSHA requires guardrails on scaffold platforms when the working surface is 10 feet or more above the lower level.

  5. What is the minimum width required for scaffold work platforms under OSHA 29 CFR 1926.451?

    Answer: 18 inches

    OSHA requires scaffold work platforms to be at least 18 inches wide to provide sufficient footing for workers.

  6. Under OSHA scaffold standards, what is the maximum allowable gap between adjacent scaffold planks?

    Answer: 1 inch

    OSHA 29 CFR 1926.451(b)(1) permits a maximum gap of 1 inch between scaffold planks to prevent tools and debris from falling through.