ASP - Associate Safety Professional Fire Prevention and Protection Questions and Answers 1

Question 1

A safety professional is conducting a fire risk assessment for a new data center. Which of the following would be considered a component of an active fire protection system?

Accepted Answer

A clean agent fire suppression system

Answer

Active fire protection (AFP) systems are systems that require some amount of action or motion in order to work. A clean agent fire suppression system is an active system because it must detect a fire and then automatically release the agent to extinguish it. Fire-resistant walls, intumescent paint, and compartmentation are all forms of passive fire protection, which are built-in features that contain fire or slow its spread without any activation.

Question 2

According to the NFPA 101, Life Safety Code, a building used for the manufacturing and assembly of goods where the operations involve low or ordinary hazard materials is best classified under which occupancy type?

Accepted Answer

Industrial Occupancy

Answer

NFPA 101 defines an industrial occupancy as a facility used for manufacturing, assembling, finishing, or other processing of goods. Buildings with low or ordinary hazard materials fall under the 'General Industrial Occupancy' subclassification. Business, Storage, and Mercantile occupancies have different definitions related to transactions, storage of goods, and display/sale of merchandise, respectively.

Question 3

During a workplace fire drill, an employee uses a portable fire extinguisher to address a small fire in a trash can containing paper and cardboard. Which class of fire is this?

Accepted Answer

Class A

Answer

Class A fires involve ordinary combustible materials such as wood, paper, cloth, and some plastics. Class B fires involve flammable liquids and gases, Class C involves energized electrical equipment, and Class K involves cooking oils and fats.

Question 4

A safety manager is developing a fire prevention plan. Which of the following is the FIRST step in conducting a fire risk assessment?

Accepted Answer

Identifying potential fire hazards, including ignition and fuel sources

Answer

The first step in a fire risk assessment is to identify all potential fire hazards. This involves identifying sources of ignition, fuel, and oxygen, which form the fire triangle. Only after hazards are identified can you effectively assess who is at risk, evaluate controls, and develop emergency plans.

Question 5

Which of the following portable fire extinguishers would be MOST effective and appropriate for a fire involving flammable liquids like gasoline and oil in an automotive repair shop?

Accepted Answer

Foam extinguisher

Answer

Foam extinguishers are effective on Class B fires (flammable liquids) because the foam creates a barrier on the surface of the liquid, cutting off the oxygen supply and smothering the fire. Water can spread flammable liquid fires. Specialist dry powder is for Class D (combustible metals), and wet chemical is primarily for Class K (cooking fires).

(ASP) Associate Safety Professional Practice Test

(ASP) Associate Safety Professional Practice Test

ASP - Associate Safety Professional Fire Prevention and Protection Questions and Answers 1