Safety Management Systems & Risk Assessment Flashcards
7 cards from real ASI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 7 Safety Management Systems & Risk Assessment flashcards as text
In a risk matrix, if a hazard has a 'Probable' likelihood and 'Major' severity, what is the typical risk classification?
Answer: High risk requiring immediate mitigation
Probable likelihood combined with Major severity places the risk in the high-risk zone, requiring immediate management action and mitigation before operations continue.
Which of the following best describes a 'leading indicator' in SMS safety performance monitoring?
Answer: Percentage of safety management training completed by staff
Leading indicators measure proactive activities (like training completion) that predict future safety outcomes, unlike lagging indicators that measure past events.
An air carrier implements a new ground de-icing procedure without conducting a formal SRM process. Under FAA SMS requirements, this is problematic because:
Answer: Changes to operations require SRM analysis to identify and mitigate new hazards
Any significant operational change must go through the SRM process to identify new hazards introduced by the change and ensure risks are controlled before implementation.
What is 'normalization of deviance' and why is it significant to SMS?
Answer: The gradual acceptance of non-standard practices as normal, increasing risk over time
Normalization of deviance occurs when repeated unsafe deviations without negative consequences cause an organization to accept them as normal, eroding safety margins.
Under FAA SMS, which document typically serves as the foundation for an organization's SMS structure and commitment?
Answer: Safety Management System Manual (SMSM)
The Safety Management System Manual (SMSM) documents the SMS structure, policies, procedures, and organizational commitments that form the foundation of the entire system.
Which concept in SMS refers to the conditions in the work environment that predispose personnel to commit errors?
Answer: Latent conditions
Latent conditions are pre-existing system weaknesses (poor design, inadequate training, flawed procedures) that lie dormant until combined with active failures to cause accidents.
When an ASI evaluates an SMS effectiveness report, which finding would MOST indicate a mature and effective SMS?
Answer: High volume of voluntary safety reports with evidence of systemic corrective actions
A high volume of voluntary reports combined with evidence of systemic fixes demonstrates both a strong safety culture and effective use of the SMS feedback loop.