Practice Test Geeks(ASI) Aviation Safety Inspector Certification Practice Test
← All ASI Flashcard Decks

ASI Airport & Ground Safety Operations Flashcards

6 cards from real ASI practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.

Read the first 6 ASI Airport & Ground Safety Operations flashcards as text

  1. Under FAR 91.3, who bears ultimate responsibility for the safe loading and weight/balance of a commercial aircraft?

    Answer: The pilot in command

    FAR 91.3 establishes that the pilot in command is directly responsible for and final authority over the operation of the aircraft, including confirming proper loading.

  2. What is FOD in airport ground safety, and what is the most effective method to control it?

    Answer: Foreign Object Debris; controlled through regular ramp and runway inspection and sweeping programs

    Foreign Object Debris includes any material on movement areas that could damage aircraft, and systematic detection programs including regular inspections and mechanical sweepers are the primary mitigation.

  3. What does a steady red light gun signal from ATC indicate to an aircraft on the ground?

    Answer: Stop immediately

    A steady red light gun signal to a ground aircraft means stop, and is used by controllers when radio communication is unavailable or has failed.

  4. What maximum taxi speed is standard on airport ramps in the absence of specific local speed restrictions?

    Answer: 10 knots

    Industry standards and most airport operating procedures limit ramp taxi speeds to 10 knots (approximately 12 mph) to prevent collisions with personnel and equipment.

  5. Which FAA document type must an airport operator file to inform pilots of a temporary construction crane within the obstacle free zone?

    Answer: NOTAM (Notice to Airmen)

    Airport operators must file NOTAMs to notify pilots of temporary hazards including construction equipment, cranes, or lighting outages that affect safe operations.

  6. What is the primary purpose of an Aircraft Rescue and Fire Fighting (ARFF) index as specified in 14 CFR Part 139.315?

    Answer: To determine the level of ARFF equipment and personnel required based on aircraft types served

    The ARFF index (A through E) is assigned based on the length of the largest aircraft served and determines the required quantity of equipment and trained personnel.