ASI - Aviation Safety Inspector Aircraft Operations and Certification Questions and Answers 1

Question 1

An air carrier operating under 14 CFR Part 121 discovers a non-essential but required piece of equipment is inoperative during a pre-flight inspection. Which of the following documents is specifically designed to provide the flight crew with guidance on whether a flight can be dispatched under such conditions?

Accepted Answer

Minimum Equipment List (MEL)

Answer

The Minimum Equipment List (MEL) is an FAA-approved document that allows an aircraft to be operated with specific equipment inoperative, subject to certain conditions and limitations. It is developed by the operator for a specific aircraft type based on the manufacturer's Master Minimum Equipment List (MMEL), but tailored to the operator's specific configuration and operations. The AFM provides operating procedures and limitations but does not provide relief for inoperative equipment. The MMEL is the master document from which an operator develops their MEL, but it is not the dispatch document for a specific flight. The CDL addresses missing secondary airframe or engine parts, not inoperative equipment.

Question 2

An Aviation Safety Inspector (ASI) is reviewing the certification process for a new air carrier seeking a Part 121 certificate. During which phase of the FAA's five-phase certification process are proving tests conducted to assess the applicant's ability to operate safely and in compliance with regulations?

Accepted Answer

Phase 4: Performance Assessment

Answer

According to FAA guidance, the Performance Assessment phase (Phase 4) involves the demonstration and inspection of the applicant's operations. This phase includes the critical proving tests, which are live flight operations designed to demonstrate the carrier's ability to comply with regulations and manage operational risks before being granted an air carrier certificate.

Question 3

A maintenance technician performs a major alteration on a type-certificated aircraft that is not specified in the aircraft's Type Certificate Data Sheet (TCDS). The alteration is not significant enough to require a new type certificate. What specific FAA approval is required for this type of modification?

Accepted Answer

Supplemental Type Certificate (STC)

Answer

A Supplemental Type Certificate (STC) is issued by the FAA to approve a major change to the type design of a previously type-certificated product when the change is not so extensive as to require a new type certificate. An STC is required when a person who is not the original type certificate holder makes such a modification. A Form 337 documents a major repair or alteration but requires approved data, such as an STC, for the alteration. An Airworthiness Directive is issued to correct an unsafe condition. An Amended Type Certificate is typically sought by the original TC holder.

Question 4

During a ramp inspection, an ASI finds that an aircraft has not complied with a mandatory Airworthiness Directive (AD) within the specified timeframe. What is the immediate airworthiness status of this aircraft?

Accepted Answer

Unairworthy

Answer

Failure to comply with an Airworthiness Directive (AD) renders an aircraft unairworthy. ADs are legally enforceable rules issued under 14 CFR Part 39 to correct an unsafe condition. The aircraft cannot be legally operated until the requirements of the AD are met and properly documented. Applying for an AMOC does not grant airworthiness; the AMOC must be approved first.

Question 5

Which of the following is a primary responsibility of an Aviation Safety Inspector - Airworthiness (Maintenance)?

Accepted Answer

Inspecting aircraft and related equipment to ensure they conform to the type design and are in a condition for safe operation.

Answer

The core function of an ASI specializing in airworthiness (maintenance) is to inspect aircraft, maintenance programs, and related equipment to verify they meet all regulatory requirements for airworthiness. This includes confirming the aircraft conforms to its type design and is safe to fly. Financial fitness and economic authority are responsibilities of the Department of Transportation (DOT), not the ASI. While ASIs may be involved in observing tests, FAA test pilots primarily conduct in-flight testing for certification.

(ASI) Aviation Safety Inspector Certification Practice Test

(ASI) Aviation Safety Inspector Certification Practice Test

ASI - Aviation Safety Inspector Aircraft Operations and Certification Questions and Answers 1