ASE Practice Test (B3: Non-Structural Analysis & Damage Repair) 1

Question 1

What is the FIRST step in analyzing non-structural damage?

Accepted Answer

Perform a complete visual inspection of all damage

Answer

The first and most crucial step in analyzing non-structural damage is to conduct a thorough visual inspection of all affected areas. This comprehensive assessment allows technicians to identify the full extent of the damage, including hidden issues, and accurately plan the repair process. Rushing to remove parts or begin pulling without a complete inspection can lead to overlooked damage and costly rework.

Question 2

Which tool is MOST appropriate for measuring minor panel misalignment?

Accepted Answer

Dial caliper

Answer

A dial caliper is the most appropriate tool for measuring minor panel misalignment because it provides precise, quantitative measurements of small distances. Its accuracy allows technicians to detect and quantify subtle variations in gaps, flushness, or panel fit, which is crucial for restoring a vehicle to its original specifications.

Question 3

What is the MAXIMUM recommended thickness for body filler application?

Accepted Answer

1/4 inch (6mm)

Answer

Body filler is designed for minor surface imperfections, and exceeding 1/4 inch (6mm) in thickness can lead to several problems. Thicker applications are prone to cracking, poor adhesion, excessive shrinkage, and improper curing, which compromises the durability and quality of the repair over time.

Question 4

When repairing plastic bumper covers, what is the purpose of using a flex additive?

Accepted Answer

To maintain the component's flexibility

Answer

Plastic bumper covers are designed to flex and absorb minor impacts without cracking. Using a flex additive in primers, sealers, and topcoats applied to these components ensures that the paint system remains elastic. This prevents the paint from cracking, chipping, or delaminating when the bumper flexes, maintaining the repair's integrity.

Question 5

What is the proper sequence for dent repair using body filler?

Accepted Answer

Remove paint, straighten metal, apply filler, sand, prime

Answer

The proper sequence for dent repair using body filler ensures a durable and high-quality finish. First, paint is removed to expose bare metal, then the metal is straightened as much as possible. Body filler is then applied to refine the surface, sanded smooth, and finally primed to prepare for topcoat application.