ARS ARS Fueling and Deicing Operations 2

Question 1

What fuel type is used in most commercial jet aircraft operating at US airports?

Accepted Answer

Jet-A

Answer

Jet-A is the standard commercial aviation turbine fuel used at US airports, with a flash point of approximately 100°F (38°C).

Question 2

When conducting a fuel quality check before uplift, the ramp agent should check for which contamination?

Accepted Answer

Water and particulate matter

Answer

Fuel sumping checks for water and particulate contamination, both of which can cause engine flameout or fuel system blockages.

Question 3

During overwing fueling of a small aircraft, which action is required after the fuel cap is removed?

Accepted Answer

Bond the nozzle to the aircraft before inserting

Answer

Bonding the nozzle to the aircraft before inserting it into the tank prevents static discharge that could ignite fuel vapors escaping from the open tank.

Question 4

What does 'clean aircraft concept' mean in the context of winter deicing operations?

Accepted Answer

No frozen contaminants may adhere to critical aircraft surfaces at takeoff

Answer

The clean aircraft concept requires that no snow, ice, or frost be present on critical surfaces such as wings and control surfaces at the time of takeoff.

Question 5

Which regulatory body sets standards for aircraft fueling operations at US airports?

Accepted Answer

FAA

Answer

The FAA establishes regulations and standards governing aircraft fueling operations, including fuel quality, safety procedures, and personnel certification.

ARS - Airport Ramp Services Practice Test

ARS - Airport Ramp Services Practice Test

ARS ARS Fueling and Deicing Operations 2