Workplace Safety and OSHA Standards Flashcards
6 cards from real Apprenticeship Exam practice questions. Tap to flip, then mark Knew It or Still Learning — missed cards come back until you master them.
Read the first 6 Workplace Safety and OSHA Standards flashcards as text
Which of the following is the correct action if a fire extinguisher is needed? (PASS method — first step)
Answer: Pull the pin
The PASS method begins with pulling the pin to unlock the extinguisher handle.
What is the safe load limit called on scaffolding rated for its maximum capacity?
Answer: Working load limit
The working load limit (WLL) specifies the maximum weight the scaffold can safely support during use.
An apprentice notices a frayed electrical cord on a power tool. What should they do first?
Answer: Tag it out of service and report it to the supervisor
Damaged tools must be taken out of service immediately and reported so they can be repaired or replaced.
Which class of fire extinguisher is used for electrical fires?
Answer: Class C
Class C extinguishers are rated for electrical fires because they use non-conductive agents.
How often must hard hats be inspected on a construction site?
Answer: Before each use
Hard hats should be inspected before each use for cracks, dents, or damage that could reduce protection.
What color tag is typically placed on equipment that has been taken out of service using LOTO?
Answer: Red
Red tags are used in LOTO to clearly signal that equipment is de-energized and must not be operated.