API Environmental Regulations & Spill Prevention Flashcards

API RP 1004 provides best practices for the bottom loading and vapor recovery of petroleum products primarily to:

Answer: Minimize VOC emissions and prevent static ignition during tank truck loading

API RP 1004 addresses bottom loading procedures and vapor recovery systems to control VOC releases and static electricity hazards.

Under the Resource Conservation and Recovery Act (RCRA), used oil that is destined for recycling is classified as:

Answer: A regulated used oil subject to management standards, not a listed hazardous waste

RCRA's used oil management standards (40 CFR Part 279) apply to used oil destined for recycling, distinguishing it from hazardous waste.

Which API standard specifically addresses leak detection requirements for underground storage tanks (USTs)?

Answer: API RP 1621 and related UST recommended practices

API RP 1621 and associated UST publications cover installation, operation, and leak detection for underground petroleum storage tanks.

The 'Tier 1' source classification under EPA's greenhouse gas reporting rule (40 CFR Part 98) for petroleum and natural gas systems requires reporting when annual GHG emissions exceed:

Answer: 25,000 metric tons CO2 equivalent per year

EPA's GHGRP requires facilities emitting 25,000 metric tons CO2e/year or more to report annual greenhouse gas emissions.

Which term describes a facility's legal obligation to report a petroleum spill to the National Response Center (NRC)?

Answer: Reportable Quantity (RQ) notification

When a petroleum release meets or exceeds its Reportable Quantity under CERCLA or CWA, immediate NRC notification is legally required.

API RP 1175 establishes a Pipeline Leak Detection Program Management framework primarily focused on:

Answer: Defining performance objectives, metrics, and management systems for pipeline leak detection

API RP 1175 provides a management framework for pipeline operators to develop and evaluate leak detection program performance.